Pay in 4 installments free of charge for purchases from €30 to €2,000

Regulator  593 Products

The regulator often referred to as electromechanical was used in the automotive industry with dynamo and/or alternator and is now integrated into the alternator.

It regulates the loa, it includes brushes that act on the alternator manifold.

Since the alternator produces alternating current, it must be rectified in direct current through the diode bridge, the regulator then makes it possible to regulate (as its name suggests) according to the need.

If the alternator is defective, it does not necessarily comes from the controller, it is necessary to test it in order to have a correct diagnosis.

It is necessary to check the condition of the commutator to ensure that the brushes can be properly set in place and the brushes can sometimes be replaced alone.

Wagendass has selected a range of quality controllers that respect all the original criterias in order to meet your requirements. On our site by typing your alternator reference in the search bar on the home page, you can find the spart parts you need. You can also contact us directly with your alternator reference and we can guide you in order to find the right part.

On the most recent controllers there are BBS and LIN communications, the latter are called interface controllers.

Most of the brands among the largest manufacturers are concerned by our quality products.

Subcategories

  • Regulator for MITSUBISHI / HITACHI
    Regulator for...

    Hitachi alternators and mitsubishi alternators are now almost all equipped with an integrated regulator.

    This part of the alternator is very important for proper operation, it can be changed after a precise diagnosis, for example by placing the generator on a test bench.

    Our wide choice of controllers covers almost the entire hitachi and mitsubishi range.

    For brush holder regulators it is also important to check the condition of the brushes and the rotor slip ring.

    You will find in our other section the new, complete alternators covering these two brands.

  • Regulator for BOSCH
    Regulator for BOSCH

    The alternator regulator is an important element that allows the alternator to fulfil its role, particularly in charging the battery.

    A sign of failure can be seen by lighting the battery charge indicator.

    A test can be done using a voltmeter to detect the voltage.

    Other elements such as the slip ring, diode bridge, brushes can cause problems.

    Our range of alternator regulators is designed for many brands

    In this category the controllers are for Bosch alternators.

    Bosch car-mounted alternator, trucks, agricultural machinery, construction machinery

    Civil Engineering, boat alternator, tractor alternator.



  • Regulator for VALEO / DUCELLIER / PARIS-RHONE
    Regulator for VALEO /...

    It is not always necessary to replace the alternator but only parts of it, often one of the causes of the malfunction can be the regulator.

    This section offers you a whole series of regulators for Ducellier alternators, Paris-Rhone alternators, Valeo alternators.

    Always of high quality, our range covers a very large part of references.

    When replacing the voltage regulator it is important to check the condition of the rotor, especially the copper collector, if it is too deep, the brushes will not be able to fulfil their role, in which case you can change the slip ring or rotor.

    Use our search bar on the home page to find the different components.

  • Regulator for DENSO / NIPPODENSO
    Regulator for DENSO /...

    The alternator can be replaced when it is defective, but our wide range of quality parts also offers you the possibility of replacing one of its components at a lower cost !

    The alternators are composed in particular of a regulator that allows the excitation current to be modified so that its output voltage is independent of the engine speed and its power consumption.

    It is important that an accurate diagnosis be made before changing this part.

    Here you will find the appropriate controllers for the denso, nippondenso range.

    In modern alternators the regulator is almost always integrated but there are still some separate regulator models.

    They are available in 12V and 24V voltages.

  • Regulator for DELCO / REMY / MOTOROLA
    Regulator for DELCO /...

    The Delco Remy and Motorola brands are represented in this sub-section, Wagendass strives to find the best quality components at the most affordable price so that you can repair your alternator.

    The regulator has an important role and is often the most changed part, a wide range is available here, thanks in particular to the search by reference (reference of the alternator or the regulator's).
    The diagnosis is the responsibility of each customer so we draw your attention to this point because the parts once installed can not be returned.


    It should be noted that today most alternators are equipped with built-in regulators.

    Complete and new alternators are also available on our site, a very wide choice of new and qualitative alternators.

  • Regulator for ISKRA / MAHLE / LETRIKA / FEMSA
    Regulator for ISKRA /...

    LETRIKA / ISKRA / MAHLE are all regrouped under the main brand MAHLE.

    Regulators are compatible with all the references provided in the product description.

  • Regulator for LUCAS / MAGNETI MARELLI
    Regulator for LUCAS /...

    The voltage regulator is an essential element of the alternator. It is thus possible to change it after a precise diagnosis of the failure, thus avoiding the need to change the complete alternator. Sometimes on some models it is even possible to change only the alternator brushes or brushes. However, it is important to check the appearance of the rotor collector, it must not be worn irregularly. Wagendass, your alternator specialist, offers you a range of regulators for lucas or magneti marelli.

    It is as for each essential component to have the reference for a precise research Our team remaining at your disposal to enlighten you on the appropriate allocation.

  • Regulator for alternator LEECE NEVILLE
    Regulator for...

    The main task of the controller is to monitor and control the charging process of the battery. Because an optimally charged car battery is the basic requirement for the trouble-free operation of a vehicle. In addition, this component is responsible for ensuring that all energy consumers in the vehicle receive sufficient energy for their operation.
    Due to the different alternator outputs and numerous manufacturers, there are now hundreds of types of regulators.

401 - 440 of 593 items
401 - 440 of 593 items

The regulator, often referred to as electromechanical, was used in the automobile industry with a dynamo and/or an alternator, being separate from the latter. Today they are integrated into the alternator.

It regulates the load of this last one includes brushes which act on the collector of the alternator.

As the alternator produces an alternating current, it must be rectified in direct current through the diode bridge. The regulator then allows the regulation (as its name indicates) according to the demand.

If the alternator is defective, this does not necessarily come from the regulator, it is necessary to test the latter to make a correct diagnosis.

It is necessary to check the condition of the commutator to ensure that the brushes and or carbon can be properly supported on it. The brushes can sometimes be replaced alone.

Wagendass has selected a range of quality regulators that meet all the original criteria to best meet your requirements. On our site by typing in the search bar of the home page your reference of alternator. You can also contact us directly for any research.

On the most recent regulators we will find BBS and LIN type communications, these are called interface regulators.

Most of the brands among the biggest manufacturers are concerned by our quality products.