Please enter the email address you used to register. We will then send you a new password.
On the starter there are rings or also called bushings, this one has its importance. One is found on the collector side of the armature at the rear bearing, there is also a bearing on the support or front side either on the starter nose, there is also sometimes a ring on the intermediate bearing of the starter.
On older models such as Ducellier o...
On the starter there are rings or also called bushings, this one has its importance. One is found on the collector side of the armature at the rear bearing, there is also a bearing on the support or front side either on the starter nose, there is also sometimes a ring on the intermediate bearing of the starter.
On older models such as Ducellier or Paris-Rhone, we often think about changing the brushes or starter brushes, but it is important to check the wear of these rings and possibly replace them.
Ball Bearing 608-2RS1 for starter DENSO / MITSUBISHI / FORD / HITACHI Information: A = DE mm 22.00 B = DI mm 8.00 C = Height 7.00
for starter DENSO 028000-7700 / 028000-8620 / 028000-8980 028000-9270 / 028000-9320 / 028000-9321 for starter MITSUBISHI M2T80582 / M2T87971 / M3T61071 / M3T61171 MD344182 / MM409411 for starter HITACHI...
Ball Bearing for starter MITSUBISHI
Ball Bearing + joint spi for starter MITSUBISHI
Bushing for starter BOSCH 0001362051 / 0001362052 / 0001362063 / 0001367004 0001362064 / 0001362093 / 0001362096 / 0001362097 / 0001367012
Bushing for starter BOSCH 0001223505 / 0001358048 / 00013590030001359008 / 0001359010 / 0001359012 / 0001359013 / 0001359072 / 0001363110 / 0001362319
Bushing for starter DENSO 428000-1630
Bushing for starter BOSCH
Bushing for starter BOSCH
On the starter of your vehicle, you can find rings also called bushings. These are very important. Indeed, there is a ring on the collector side of the armature (at the rear bearing), and a bushing on the front support side or on the starter nose. There is also sometimes a bushing on the intermediate bearing of the starter.
On older models, we usually think of changing the brushes or carbon brushes of the starter, but rarely the bushings: the bushings of Ducellier starters and Paris-Rhone starters are mainly to be checked.
Note that it is therefore important to check the wear of your starter's bushings and to replace them if necessary.
Our range of needle bearings for starters
Needle bearings are made of a cylinder with a small diameter and a longer length than other types of bearings (simple, ball, etc).
These needle bearings are mostly found on 2-stroke engines because the lubrication of the bearings is complex on this type of engine.
A bad choice of bearing can lead to the rapid deterioration of this part but can also damage the engine. It is therefore important to choose the right type of bearing for your vehicle's starter motor. Do not hesitate to contact our team!