Pay in 4 installments free of charge for purchases from €30 to €2,000

Carburetion  516 Products

The carburetor were installed in the engines before the injection arrived.

It was used in internal combustion engines, its role is to act on the air/fuel mixture and control the quantity of this mixture supplied to the engine.

The main brands are Solex, Weber, Zenith, Pierburg also called German solex (which sometimes generates confusion when searching for parts), Mikuni or Aisan on Japanese vehicles.

Our gasket kit are the repair kit of these carburettors.

Different membranes, seals, needles, nozzles are available.

You can also find carburetors for Briggs & Stratton, Echo, Honda, Husqvarna, ACME, Stihl, Tecumseh, Tillotson, Viper engines.

Subcategories

  • Carburettor

    The carburetor was the ancestor of injection.

    It equipped the internal combustion engines, its role was to act on the mixture as well as to control the quantity of the air/fuel mixture supplied to the engine.

    The main brands are Solex, Weber, Zenith, Pierburg also called German solex (which sometimes causes confusion when looking for parts), Mikuni or Aisan on Japanese vehicles.

    You can also find carburettors for Briggs & Stratton, Echo, Honda, Husqvarna, ACME, Stihl, Tecumseh, Tillotson, Viper engines.

    To find a part for your carburetor, it is imperative to be able to identify it.

    For example:

    SOLEX 32 PBISA

    ZENITH 32 IF2

    WEBER 32 TL

    Without this it will be nearly impossible to identify your carburetor.

  • Diaphragms for DELLORTO
  • Diaphragms for...

    The diaphragms play an essential role in the proper functioning of the carburetor, as each brand has its own specific diaphragms, as Zenith carburetors, Solex carburetors and Pierburg carburetors come in various models.

    The diaphragm is the one that is most often changed part, if its rubber part is pierced it no longer ensures watertightness.

    The enrichment diaphragm and the starter opening assistance diaphragm when present on the carburettor also need to be changed when the carburettor taken appart and cleaned.

  • Diaphragms for WEBER

    Find a range of membranes for Weber carburetors at Wagendass

    Wagendass is a distributor of weber carburettor gaskets and parts. Find spare parts for all Weber carburettor models: 40 DCNF, 30 DGF, 32 and 34 carburettor.

  • Gasket kit and parts...

    Solex is the carburetor brand created in 1905 by Maurice Goudard and Marcel Mennesson, they also invented the famous solex bike.

    These carburettors are used in many French vehicles, including Peugeot / Talbot / Simca and others.

    You will find a wide range of gasket kits including, depending on the model, the needle, the base gasket and/or the top of the tank, copper gasket, return pump membrane and/or enrichment, wedge.

    The reference of the solex carburettors is on a small silver plate on the top of the tank, unfortunately when the carburettor has already been overhauled this plate is not put back in its place. in this case on some models the reference is engraved on the base plate. you can also compare the old tank top seal with the models shown in the picture to identify it.

    The replacement of these parts is not too complex, however, you need to have a minimum of knowledge in the field.

  • Gasket kit and parts...

    Zénith is a carburetor brand founded by François BAVEREY in 1907.

    The carburetor optimizes the "air-fuel" setting.

    The Zenith carburetor has been improved with settings based on 2 nozzles, one designed to optimize the mixture as the air speed increases, the other called a compensator provides an additional air jet.

    Many vehicles were equipped with Zenith carburetors, references can be found in the form 28IF, 32IF, 36IV, INAT.

    Pierburg is a carburetor brand also called German solex.

    Pierburg carburetors are used in many cars under references such as 2E3, 2E2, PDSIT, 1B1, 4A1 and so on.

    Especially on BMW, Volkswagen, Opel, Porsche, Seat.

     

  • Gasket kit and parts...

    Weber is an Italian brand created in 1923 by Edoardo Weber in Bologna, which was first intended to equip Fiat vehicles. Weber innovated by creating double body carburettors, then contributed to equip racing cars with this technology, notably Alfa Romeo and Maserati, and later the Weber brand came under the control of Magneti Marelli.

    Carburetor adjustment requires a certain amount of know-how to ensure that the air/fuel mixture is optimized.

    Components including sprinklers, injector, float, needle, recovery and enrichment pump diaphragms, richness screw, starter box, base spacer and gaskets to ensure proper sealing contribute to the proper functioning of the carburettor.

    Depending on the model, our pockets include membrane, needle, tank top and/or base seal, as well as the shim for certain types.

  • Gasket kit and parts...

    MIKUNI, AISAN,

41 - 80 of 516 items
41 - 80 of 516 items